The text in this area of your pages is also editable. Since this will be a part of all of your pages, use it for significant information like announcements, news or links.

gpEasy CMS

gpEasy.com

gpEasy Forum

gpEasy Download

Documentation

Follow on Twitter

Become a Fan

@ freshmeat

@ sourceforge

The text in this area of your pages is also editable. Since this will be a part of all of your pages, use it for significant information like announcements, news or links.

gpEasy CMS

gpEasy.com

gpEasy Forum

gpEasy Download

Documentation

Follow on Twitter

Become a Fan

@ freshmeat

@ sourceforge

Technical Data

STUD SIZE .105" insulation pin through 5/32 whit or M4 threaded studs
STUD MATERIAL Mild steel, stainless steel. Zinc, galvanised and copper finished.
WEIGHT 16 kgs
SIZE(L.W.H) 315 mm x 436 mm x 245 mm
WELDING RATE 15 per minute
INPUT POWER 240V A.C.
WELD MODE Contact
CIRCUIT PROTECTION Primary fuses
Output voltage; circuit breaker operator protection.
CABLE LENGTH Gun 4.8m (16')
Earth 3.04m (10')

 

Description

Designed specifically for the insulation industry

The CD1000 is designed specifically for the insulation industry. The Pin
Welders robust and reliable design has performed efficiently and reliably for
many years under the stress of on-site and workshop conditions.

The unique chuck guard design has the following advantages:

  1. No adjustment necessary for different length pins.
  2. Protects chuck from zinc splashing during welding, therefore increasing the life of the chuck.
  3. Because of the self-tightening effect between the chuck and the chuck guard, arcing between the chuck and the pin is

Details

SPEED OF OPERATION Welding time is less than 0.0002 seconds. Fifteen welds per minute possible.
COST SAVING Speed of operation and portability cut costs up to 10 times compared with conventional methods, drilling tapping etc. Material saving by virtue of simpler design.
RELIABILITY Robust construction and solid state components insure long life and dependability in harsh working environment.
NO REVERSE SIDE MARKING No distortion or burning. Therefore no reworking on the reverse side.
SIMPLE TO OPERATE Unskilled operators are all that is needed. No flux, ferrules or inert gas required.
SAFE No arc flash. Fully insulated gun, 14V DC operation. Internal safety circuit to protect operator.

 

Back to Top

KCD Studwelding

ABN 38 108 395 027

96a Herald Street
Cheltenham Victoria
Australia 3192

Telephone: 03 9584 1588

International: +61 3 9584 1588

Facsimile: (+61 3) 9584 1688

Email: info@kcdstudwelding.com.au